Configuring Workstation’s with a Cash Register and Key Definition

 

In this document we will walk you through the process of setting up each cash register and key set. If at any time you find yourself in need of additional support, please contact our Technical Consultants at support@peakinfo.com or 801-572-3570 x2.

 

Prerequisites:  You must have the Point-of-Sale module. If you have the POS module you will want to customize your key definitions prior to configuring the cash register and key definitions.

 

This document will go over:

 

ü Configuring Cash Register and Key Definitions 

 

Configuring Cash Register and Key Definition

To configure a workstation with the default or a specifically defined Cash Register click File >Workstation Configuration in the upper left of the application.

 

 

This will take you to the “Workstation Configuration” screen. All of the settings in the workstation configuration are local settings. You will need to configure each machine that will be running a cash register. From the “General Settings (F2)” tab under the Financial Processing area on the right choose a register and key definition from the drop downs and click [OK]. 

 

 

 Please note the following:

 

·       The internet register is where the online sales go if you have the ActivityReg online registration module and should not be used for any other sales.   

·       The starting Key Definition is “Default” which will be the only selection if you have not defined other Key set definitions. This is the only choice if you do not have the Point-of-Sale module.

                                                                                                                  

 

SM:CR/POS:B:July21